Filtration Skids


The Liquifine Model LF Series Portable Filter Cart is designed for on site purification of contaminated oil. This self-contained, heavy duty filtration system can be wheeled to the reservoir or holding tank and within minutes it will be removing particulate and/or water from your oil.
  • LF-1 holds one 6" x 18" cartridge
  • LF-2 holds one 6" x 36" cartridge


  • Hydraulic Oil
  • Lube Oil
  • Solvents
  • Quench Oil
  • Coolants
  • Transformer Oil
  • Circuit breaker Oil
  • Gear Box Oil


  • Carbon Steel Construction
  • Filter Elements with up to 8350 square inches of media to remove water and particulate from 0.5 micron to 55 microns
  • Quick Disconnect Hose Couplings
  • Pressure Gauges


  • 6 gpm Flow Rate (Higher Flow Rates Available)
  • Motor: TEFC, 1 HP/115V/1 Phase
  • Inlet Strainer
  • Buna Seals & O Rings
  • 10-1/2" Wheels
  • 10' Suction & Discharge Hoses
  • 25' Power Cord

Back To Top

GF Series - 6 to 24 Element Filters

General Description

These filters are steel constructed and made to handle many kinds or degrees of contamination and flow rate requirements. Designed for 150 PSI maximum operating pressure

The inlet and outlet connections are 150 pound ASA flanges, NRT female pipe connections, HEAD gaskets and gasket Buna N are used on other connections.

The GF-Series, 6 through 24, is easily installed and interchangeable with element types from 1/2 to 25 microns.

GF-6 Duplex Filter Vessel

Standard GF Series, 6 - 24
  • 2 Pressure Gauges
  • Element Holders
  • Lifting Davits
  • Drain Outlets
  • Vent Openings
  • Hydraulic Oils
  • Engine Oils
  • Diesel Fuels
  • Fuel Oils
  • Full Flow Lube Oil
  • Aviation Fuels
  • Insulating Oils
  • Turbine Oils
  • Rolling Oils
  • Quench Oils
Accessory Items
  • Pressure Relief Valves to Handle Thermal Expansion
  • Differential Pressure Gauges
  • Automatic Air Eliminators Devacuate Entrained Air in System
  • Immersion Heaters
  • Liquid Level Gauges
  • Multiport Valves for Dual Installation
  • Portable Skids
  • Pumps and Motors for Skid or Side Mounting
Back To Top

Filtering, Flushing & Heating Systems

SYS-2400 GPM (BF-24) Flushing Skid

35 Years Experience in Industrial Oil Treatment & Purification Applications

  • Start up Flushing
  • On-line Oil Treatment & Dehydration
  • Turbine Oil Conditioning
  • API Cooling and Filtering
  • On-line Turbine Blade Water Wash System
  • Flow Ranges from 1 to 5000 GPM
  • 10 PSI to 150 PSI design pressures (higher on request)

Sys-40 GPM (GF-6) Filter Skid

Sys-250 GPM (GF-6) Filter Skid

SYS-35 GPM (GF-1) Filter Skid

Sys-100 GPM Duplex Filter Skid

Turbine Blade Water Wash System

Back To Top

3160 Lenora Church Road , Snellville (Atlanta), GA 30039 USA
Phone: 770-449-4000 Fax: 770-982-6868