 |
High Performance Pressure Coalescing & Vacuum Dehydration Technology |
|
|
|
|
|
|
|
Performance |
|
Water Removal The 'TOPS' System removes free, emulsified and dissolved water through a combination of
high flow coalescing filter/separator and a slip stream vacuum dehydrator. Based upon an influent of 5000 PPM
concentration of water the "TOPS" System will reduce free and
emulsified water content to less than 25 PPM and total water content including dissolved water to less than 25
PPM based on a maximum of 200 SSU turbine oil.
|
|
|
|
|
Particulate Removal The 'TOPS' System will achieve a particulate cleanliness rating of ISO 16/13 or
better per NFPA.
|
|
|
|
|
50 G.P.M. TOPS INTEGRATED
TURBINE OIL PURIFICATION SYSTEM
|
|
Description |
|
The 'TOPS' Turbine Oil Purification System combines the principles of rapid water removal used on our
Turbine Oil Reclaimer "TORE" Units and the polishing characteristics of our “VAC-DRI“ vacuum
dehydrator to obtain maximum turbine oil system cleanliness. 50 gallons per minute high flow rate filtration
and coalescence are employed for rapid reservoir turnover, while combining our 25 gallons per minute “VAC-DRI“
vacuum dehydrator to eliminate dissolved water, and provide degasification. Custom designed flow rates, dimensions
, & features are our specialty.
|
| |
|
|
High Performance Pressure Coalescing & Vacuum Dehydration Technology |
|
|
|
|
|
|
|
Performance |
|
Water Removal The 'TOPS' System removes free, emulsified and dissolved water through a combination
of high flow coalescing filter/separator and a slip stream vacuum dehydrator. Based upon an influent of 5000
PPM concentration of water the 'TOPS' System will reduce free and emulsified water content to less than 25 PPM
and total water content including dissolved water to less than 25 PPM based on a maximum of 200 SSU turbine oil.
|
|
|
|
|
Particulate Removal The 'TOPS' System will achieve a particulate cleanliness rating of ISO 16/13 or better per NFPA.
|
|
|
Back To Top
|
|
|
|
|
TURBINE OIL CONDITIONER |
|
Description |
|
The T.O.R.E. series turbine oil purification system utilizes the principals of rapid water removal by high
speed coalescence and separation technology, and high performance filtration media.
|
| |
|
|
|
|
|
Model: LHS-TORE-6-W-H16-A
6 G.P.M. Process Flow Rate
|
| |
|
|
|
|
|
Model: LHS-TORE-10-W-16-B
10 G.P.M. Process Flow Rate
|
| |
|
|
|
|
|
Model: LHS-TORE-35-17-W-16-A-B
Two Speed 35 / 17 G.P.M. Process Flow Rate
|
| |
|
|
|
|
|
Model: LHS-TORE-70-35-W-32-A-B
Two Speed 70 / 35 G.P.M. Process Flow Rate
|
|
|
|
|
|
Performance |
|
The T.O.R.E. series turbine oil conditioner removes free, emulsified and dissolved water through high
performance pressure coalescence and separation. Based on an influent of 5000 PPM concentration of water,
the system will reduce free and emulsified water content to less than 25 PPM, and total water content to
less than 150 PPM based on a maximum of 200 ssu.
|
|
|
Filtration Performance |
|
The T.O.R.E. system will achieve a particulate cleanliness rating of ISO 16/13 or better per NFPA. The system
utilizes high performance beta rated microglass synthetic media for superior dirt holding capacity, and
efficiency. Pre-filtration begins with 6 micron absolute and polishing filtration down to 2.8 micron absolute.
|
|
|
Back To Top
|
|
|
|
